Home › Custom Home Builders Toronto › Cost to Build a Custom Home in Toronto
Cost to Build a Custom Home in Toronto
As of November 2026, building a custom home in Toronto costs roughly $350 to $500 per square foot at the entry level of custom work, $500 to $750 for most high-end custom homes, and $750 to over $1,100 for architect-led luxury builds. These are construction costs only, before land, HST, design fees and City charges. They are Toronto market ranges drawn from published sources, not a Khales price.
Cost to build a custom home in Toronto: ranges by build level
As of November 2026. Construction cost per square foot of finished floor area above grade.
Swipe the table sideways to see all columns.
| Build level | Typical cost per sq ft | What it usually means |
|---|---|---|
| Production home, for comparison | $150 to $275 | A builder's standard plan, unfinished basement |
| Entry custom | $350 to $500 | Your own design, simple massing, good standard finishes |
| High-end custom | $500 to $750 | Architect-designed, larger glazing, custom millwork, premium finishes |
| Luxury custom | $750 to $1,100+ | Complex architecture, steel and large glass, top-tier finishes and systems |
Where the ranges come from. The production and custom figures for the Greater Toronto Area come from Altus Group’s 2026 Canadian Cost Guide, which puts custom-built single-family homes at $500 to $1,130 per square foot and production homes at $150 to $275. Published ranges from Toronto custom builders run lower at the entry end, generally from about $300 to $500 per square foot for simpler custom homes, with the most detailed homes going well past $1,000. The entry-custom row reflects those builder figures. The upper rows follow Altus.
What the custom home cost per square foot includes and excludes
Included in the ranges:
- Construction of the house: structure, envelope, building systems and interior finishes
Not included, and budgeted separately:
- Land
- HST, at 13% in Ontario
- Design and engineering fees: architecture, structural and other consultants
- Permits and development charges: see the City costs below
- Site work: demolition of an existing house, site servicing, and landscaping
- Basement and garage floor area: the ranges are applied to finished space above grade. The basement and garage add cost, but are not counted in the square footage the rate is multiplied by
City costs on top of construction: permits and development charges
As of November 2026, these are the City of Toronto’s main charges on a new house.
Swipe the table sideways to see all columns.
| Item | Amount (2026) | Source |
|---|---|---|
| Building permit, new single-family house | $18.56 per m² of floor area | City of Toronto building permit fees |
| Residential unit fee | $56.33 per new unit | City of Toronto building permit fees |
| Demolition permit | $0.18 per m² | City of Toronto building permit fees |
| Zoning Applicable Law Certificate, new house | $644.38 | City of Toronto |
| Development charge, single or semi-detached house | $137,846 before reductions; $55,138 with the 60% reduction under the City's 2026 Development Charges Reduction Program | City of Toronto, 2026 |
Development charges are often the largest single City cost on a new house. The reduced rate comes from a time-limited program that depends on the City’s amended development charges by-law, so the rate in force is confirmed with the City at permit time. Whether a charge applies to a house that replaces an existing one, and how much, depends on the City’s redevelopment rules, so it is confirmed with the City for each lot.
What pushes the cost of a custom home in Toronto up or down
Up:
- Design complexity: irregular massing, cantilevers, large openings and steel structure
- Glazing: wide windows and walls of glass cost more than the walls they replace
- Finish level: kitchens, bathrooms, stone, flooring and custom millwork carry the biggest range
- Tight infill sites: demolition, shoring next to neighbouring houses, and limited access for deliveries
- Smaller houses: kitchens, bathrooms and mechanical systems do not shrink with the house, so a smaller house costs more per square foot
- Single storey: a bungalow needs more foundation and roof per square foot than a two-storey house of the same size
Down:
- Simple, compact massing
- Standard sizes and repeated details
- A budget set before the design is fixed, so the design is drawn to the budget rather than cut back after pricing
How construction costs in Toronto are moving
As of November 2026, Toronto residential construction costs are flat to slightly down. Statistics Canada’s building construction price index for Toronto residential buildings fell 0.8% in the second quarter of 2026 and was 0.1% higher than a year earlier, while the 15-city average rose 2.3%. Altus Group’s 2026 Cost Guide also reports Toronto residential construction costs declining over the past year.
How Khales works out the cost of a custom home
At Khales, the budget is developed alongside the design, not after it. Every project starts with a review of what the lot allows, then the drawings and the costs are developed together, so the design is tested against the budget while it can still change. The ranges on this page describe the Toronto market. The cost of a specific home comes from its design, its lot and its finishes.
Custom home cost FAQs: Toronto
How much does it cost to build a house in Toronto?
As of November 2026, a custom home in Toronto costs roughly $350 to $500 per square foot at the entry level of custom work, $500 to $750 for most high-end custom homes, and $750 to over $1,100 for luxury builds, for construction alone. A production home is cheaper, at about $150 to $275 per square foot according to Altus Group’s 2026 Cost Guide.
Does the cost per square foot include land and HST?
No. The ranges are construction costs only. Land, HST at 13%, design and engineering fees, permits, development charges and site work are budgeted separately.
How much does a custom home cost elsewhere in Ontario?
Altus Group’s 2026 Cost Guide puts custom-built homes at $500 to $1,130 per square foot in the Greater Toronto Area and $500 to $1,000 in Ottawa. Outside the large cities, land, City charges and labour costs differ, so the totals differ more than the construction rates.
Why do published cost ranges differ so much?
Sources measure different things. Some count only construction, some include basements or site work, and some describe production homes rather than custom ones. Ask any builder what floor area a rate applies to and what it leaves out.
Is a bigger house cheaper per square foot?
Usually. Kitchens, bathrooms and mechanical systems do not grow in proportion to the house, so their cost is spread over more floor area in a larger home.
Cost to build a custom home in Toronto: related pages
Talk to us about the cost of your custom home in Toronto
Send us the address and what you want to build, and we’ll start with what the lot allows and a budget developed alongside the design.
We use what you send only to answer your enquiry. See our privacy policy.